It took some time to achieve the product I was looking for, but we eventually got there. I do feel like a lot of hard work was put into this, and it even exceeded the page requirement. I'm pretty pleased overall. I give my thanks.

BMAL 590 Quantitative Research Techniques and Statistics

**BMAL 590 Quantitative Research Techniques and Statistics**

**Test**

**Decision Analysis (Section 8)**

1. Which one of the following would not be considered a state of nature for a business firm?

2. Assume an investment is made a significant number of times using the same probabilities and payoffs. In this case, the average payoff per investment represents_____.

3. The level of doubt regarding the decision situation where both the possible states of nature and their exact probabilities of occurrence are known as which of the following?

4. The difference between expected payoff under certainty and expected value of the best act without certainty is the _________.

5. Which of the following regarding EMV/EOL if f__alse__?

**Analysis of Variance (Section 7)**

6. The F-statistic is a one-way ANOVA represents the_______.

7. In _________ we can observe the effect on the response variable of at least two factors.

8. The distribution of the test statistics for analysis of variance is the ________.

**What is Statistics? (section 1)**

9. A sample of 500 athletes is taken from a population of 11,000 Olympic athletes to measure work ethic. As a result we ________.

10. When data is collected in a statistical study for only a portion or subset of all elements of interest we are using a _______.

**Data Collecting and Sampling (section 2)**

11. When a person receives an email questionnaire and places it in their deleted items without responding, they are contributing to ________.

12. The difference between a sample mean and the population mean is called the______.

**Introduction to hypothesis Testing (Section 5)**

13. A type I error occurs when we _______.

14. In a criminal trial where the null hypothesis states that the defendant is innocent, a Type II error is made when________.

15. The p-value of the test is the______.

**Probability (Section 3)**

16. Initial estimates of the probabilities of events are known as_____.

17. If the outcome of event A is not affected by event B, then events A and B are said to be ________.

18. The collection of all possible outcomes of an experiment is called ________.

19. Suppose P(A) = .35. The probability of the complement of A is _______.

**Inference about a Population (Section 6)**

20. An unbiased estimator is ________.

**QUIZ Section 1-**

A company has developed a new smartphone whose average lifetime is unknown. In order to estimate this average, 200 smartphones are randomly selected from a large production line and tested. Their average lifetime is found to be 5 years. 200 smartphones represents a ________. Which of the following is a measure of reliability of a statistical inference?

The process of using sample statistics to draw conclusions about population parameters is called_____.

Which of the following statements involve descriptive statistics as opposed to inferential statistics?

A population of all college applicants exists who have taken the SAT exam in the US in the last year. A parameter of the population are______.

**QUIZ Section 2**

-Which of the following statements is true regarding the design of a good survey?

-Which method of data collection is involved when a researcher counts and records the number of students wearing backpacks on campus in a given day?

-Manager at electronics store wants to know if customers who purchased video recorder over the last 12 months are satisfied with their products. If there are 4 different brands of video recorders made by the company, which sampling strategy would be best to use? -Which of the following types of samples are almost always biased?

-_____ is an expected error based only on the observations limited to a sample taken from a population.

**QUIZ Section 3**

Bayes’ Law is used to compute ____.

The classical approach describes a probability_________.

If a set of events includes all possible outcomes of an experiment these events are considered to be________.

Which statement is not correct? **i**

**QUIZ Section 4-**

The concept that allows us to draw conclusions about the population based strictly on sample data without having any knowledge about the distribution of the underlying population is_________.

**The central limit theorem**

Each of the following are characteristics of the sampling distribution of the mean except________.

-Suppose you are given 3 numbers that relate to the number of people in a university sample. The three numbers are 10,20,30. If the standard deviation is 10, the standard error equals___ .

You are tasked with finding the standard deviation. You are given 4 numbers. Numbers are 5, 10, 15, and 20. The standard deviation equals.

Two methods exist to create a sampling distribution. Once involves using parallel samples from a population and the other is to use the______.

**QUIZ Section 5**

The hypothesis of most interest to the researcher is the______.

A Type I error occurs when________.

Statisticians can translate p values into several descriptive terms. Suppose you typically reject H0 at a level of .05. Which of the following statements is *incorrect*?

In a criminal trial where the null hypothesis states that the defendant is innocent a type I error is made when________.

To take advantage of the information of a test result using the rejection region method and make a better decision on the basis of the amount of statistical evidence we can analyze the _____.

**Quiz Section 6**

An unbiased estimator is ________.

Thirty-six months were randomly sampled and the discount rate on new issues of 91-day Treasury Bills was collected. The sample mean is 4.76% and the standard deviation is 171.21. What is the unbiased estimate for the mean of the population?

a 98% confidence interval estimate for a population mean is determined to be 75.38 to 86.52. If the confidence level is reduced to 90%, the confidence interval for the population mean ____

Suppose the population of blue whales is 8,000. Researchers are able to garnish a sample of oceanic movements from 100 blue whales from within this population. Thus_____

In the sample proportion, represented by p=x/n the variable x refers to:

**QUIZ Section 7**

Distribution of the test statistic for the analysis of variance is the______.

In Fisher’s least significant difference (LSD) multiple comparison method, the LSD value will be the same for all pairs of means if______.

One-way ANOVA is applied to 3 independent samples having means 10, 13, and 18 respectively. If each observation in the 3rd sample were increased by 30, the value of the F statistic would______. Assume a null hypothesis is found to be true. By dividing the sum of squares of all observations or SS (Total) by (n-1) we can retrieve the______.Which of the following is true about a one-way analysis of variance?

**QUIZ section 8**

A tabular presentation that shows the outcome for each decision alternative under the various states of nature is called a ______.

Which of the following statements is false regarding the expected monetary value (EMV)?

In the context of an investment decision, _______ is the difference between what the profit for an act is and the potential profit given an optimal decision.

The branches in a decision tree are equivalent to______.

Which of the following is not necessary to compute posterior probabilities?

Concerning test statistics sum of squares for error measures the ____.

The average speed of cars passing a checkpoint is 60 miles per hour with a standard deviation of 8 miles per hoir. Fifty passing cars are clocked at random from this checkpoint. the probability that the sample mean will be between 57 and 62 miles per hour is?

Which of the following do not represent an advantage of taking a sample:

__________addresses unknown parameters in the real world that parallel descriptive measures of very large populations.

A confidence interval is defined as___________.

_______ are utilized to make inferences about certain population parameters. if when using the confidence interval estimator of a proportion the researcher finds there is no chance of finding success in the population, adding the number 4 to the sample size could be part of the solution, which refers to ____.

A _______ sample involves diving the population into groups then randomly selecting some of the groups and taking either a sample or a census of their members.

Suppose we have a test hypothesis at a significance level of .01 where the resulting F-ratio value is 3.2. The degrees of freedom from the numerator are 10 and the denominator are 20. The p-value of the test is .0129 and we can claim the result:

assume a null hypothesis is found true. By dividing the sum of squares of all observations or SS(total) by (n-1), we can retrieve the ______.

Historically, a company that mails its monthly catalog to potential customers receives orders from 8 percent of the addresses. If 500 addresses are selected randomly from the last mailing, what is the probability that between 35 and 50 orders were received from this sample?

**Section 1- What is Statistics?**

**What is Statistics?**

**Statistics**is a way to get information from data. It is a tool for creating new understanding from a set of numbers.

**Descriptive Statistics**

**Descriptive Statistics**– is one of two branches of statistics, which focuses on methods of organizing, summarizing, and presenting data in a convenient and informative way.- One form of descriptive statistics uses
**graphical techniques,**which allow statistics practitioners to present data in ways that make it easy for the reader to extract useful information.**Histogram (bar graph)**can show if the data is evenly distributed across the range of values, if it falls symmetrically from a center peak (normal distribution), if there is a peak but more of the data falls to one side (skewed distribution), or if there are two or more peaks in the data (bi-or multi-modal)**Numerical Techniques-**rather than providing raw data the professor may only share summary data with the student. One such method used frequently calculates the average or mean

- One form of descriptive statistics uses
**Measure of central location- the mean**(average) is one such measure, it is the sum of all data values divided by the number of values**Range**– the simplest measure of variability, is calculated by subtracting the smallest number from the largest.**Median**– midpoint of the distribution where 50% of the data values are high and 50% are lower. (not that the mean and median will not necessarily be an observed test score).**Mode**– the most frequently occurring data value**Variance-**the average squared deviation to the mean. To compute the difference between each data value and the mean is calculated and squared. If differences are not squared sum will always be 0.**Standard deviation****–**simply the square root of the variance and gets the variability measure back to the same units as the data- Negatively skewed if mean is to the left (point is to the right), positively skewed if the mean is to the right (point is to the left)

**Inferential Statistics**

- Inferential statistics is a body of methods used to draw conclusions or inferences about characteristics of population based on sample data
- Example of inferential statistics is exit polling during elections
- Practitioners can control the fraction of the size of the sample with between 90-99%

**Key Statistical Concepts**

**Statistical inference**problems involve three concepts:**population**– the group of all items of interest to a statistics practitioner. Frequently very large and may in fact be infinitely large. Does not necessarily refer to a group of people**parameter**– descriptive measure of a population, represents the information we need

**sample**– set of data drawn from the population**statistical inference-**we use statistics to make inferences about parameters. Statistical inference is the process of making an estimate, prediction, or decision about a population based on sample data.- Build in measure of reliability
- Confidence level- proportion of times that an estimating procedure will be correct

- Significance level- measures how frequently the conclusion will be wrong in the long run

- Build in measure of reliability

**Statistic-**a descriptive measure of a sample- Populations have parameters while samples have statistics
- Since Statistical inference involves using statistics to make inferences about parameters, we can make an estimate, prediction or decision about a population based on sample data
- Statistical inference only deals with making conclusions about the unknown population parameters based on the observed sample statistics.

**Confidence and Significance levels**

- Confidence level+ significance level=1
- Example- if confidence level is 95% the significance level is 5% because must equal 1

**QUIZ Section 1-**

A company has developed a new smartphone whose average lifetime is unknown. In order to estimate this average, 200 smartphones are randomly selected from a large production line and tested. Their average lifetime is found to be 5 years. 200 smartphones represents a ________. Which of the following is a measure of reliability of a statistical inference?

The process of using sample statistics to draw conclusions about population parameters is called_____.

Which of the following statements involve descriptive statistics as opposed to inferential statistics?

A population of all college applicants exists who have taken the SAT exam in the US in the last year. A parameter of the population are______. **Section 2- Data Collecting and Sampling**

**Methods of collecting data**

- Statistics is a tool for converting data into information
- Number of methods that produce data
- Data are the observed values of a variable
- We define a variable or variables that are of interest to us and then proceed to collect observations of those variables.

**Three popular methods to collect data for statistical analysis-****Direct Observation-**ex. Number of customers entering a bank per hour- Simplest method to obtain data
- Data said to be observational
- Many drawback to direct observation including that it is difficult to produce useful information in a meaningful way
- Advantage is low cost

**Experiments-**ex new ways to produce things to minimize costs- Sample is split into two groups, one who does something and the other does not then evaluate results from two groups

**Surveys –**one of the most familiar data collecting methods. Solicit information from people concerning such things as their income, family size and opinions on various issues. Majority are conducted for private use.**Response rate-**the proportion of all people who were selected to complete the survey**Low response rate-**can destroy the validity of any conclusion resulting from statistical analysis. Need to ensure data is reliable.

**Personal interview-**many researchers believe this is the best way to survey people, involves an interviewer soliciting information from a respondent. Has higher response rate. Main disadvantage is the cost.**Telephone interview-**usually less expensive but also les personal and lower expected response rate

**Self-administered questionnaire**– usually mailed to sample of people. Inexpensive, but usually have low response rate, have high number of incorrect responses due to misunderstanding questions

**Questionnaire Design**

- Must be well thought out, key design principles include:
- Keep short as possible
- Ask short, simple, clearly worded questions,
- Start with demographic questions
- Use dichotomous (yes/no) and multiple choice for ran
- Use open ended questions cautiously
- Avoid using leading questions
- Try questionnaire to small number of people first to uncover problems
- Think about the way you intend to use the collected data when preparing the questionnaire

**Sampling**

- Chief motives for examining a sample rather than a population are cost and practicality
- Target population – the population about which we want to draw inferences
- Sampled population- actual population from which the sample has been taken
- Sampled and target populations should be close to one another

**Simple Random Sampling**

**Sampling plan**is a method or procedure for specifying how a sample will be taken from a population**Three different sampling plans****Simple random Sampling**- Sample selected in such a way that every possible sample with the same number of observations is equally likely to be chosen
- Ex. Raffle with tickets
- Low cost
- Can assign numbers to everyone in the population and then randomly select from numbers

**Stratified random sampling**- Obtained by separating the population into mutually exclusive sets or stata and then drawing simple random samples from each stratum
- Ex- gender (male or female), age (number or range) occupation (professional, blue collar, clerical), household income (under $25K, over $100K, etc)
- Avoid strata when there is no connection between the survey and strata, ex using religion to determine group for survey on tax increase
- Advantage is ability to make inferences within each stratum to compare strata (ex looking at lowest income group favors tax increase or compare highest and lowest income groups to determine whether they differ in support of tax increase)
- Stratifications must be done where the strata are mutually exclusive, meaning that each member of the population must be assigned exactly one stratum
- After population has been stratified, we use simple random sampling to generate complete sample

**Cluster sampling**- Simple random sample of groups or clusters of elements versus a simple random sample of individual objects
- Useful when it is difficult or costly to develop a complete list of the population members, also useful when population elements are dispersed geographically
- Ex- randomly select block within a city to gather data from (rather than getting lists of households to use)
- Cluster sampling reduces costs
- Increased sampling error, as may have many similarities in those you sample

Larger sample size usually means more accurate sample estimates

**Sampling Error**

- Two major types of error when sample is taken from a population: sampling error and non-sampling error
**Sampling error**– refers to the differences between the sample and the population that exists only because of the observation that happened to be selected for the sample.- Error that we expect to occur when we make a statement about a population that is based only on the observation contained in a sample taken from a population
- Difference between the true (unknown) value of the population mean and its estimate, the sample mean, is the sampling error. Size of the deviation may be large simply due to bad luck that a particularly unrepresentative samples happened to be selected

**Non-Sampling Error**

- Non-sampling error- more serious than sampling error because taking a larger sample wont diminish the size or the possibility of occurrence of this error
- Result from mistakes that are made in the acquisition of the data an from the sample observations being selected improperly
- Three types of non-sampling errors:
**1-Data Acquisition errors-**arise from the recording of incorrect responses. May be result of incorrect measurement taken because of faulty equipment, mistakes made during transcription from primary sources, inaccurate recording of data due to misinterpretation of terms or inaccurate responses to questions concerning sensitive issues**2- Non-Response Error-**refers to error or bias introduced when responses are not obtained from some members of the sample. When this happens sample observations may not be representative of the target population resulting in biased results.**Response rate-**the proportion of all people selected who complete the survey, key survey parameter and helps in understanding the validity of the survey and sources of non-response error

**3- Selection bias**– occurs when the sampling plan is such that some members of the target population cannot possibly be selected for inclusion in the sample. Together with non-response error selection bias

- When responses are not received from a sampled person bias is introduced

**QUIZ Section 2**

-Which of the following statements is true regarding the design of a good survey?

-Which method of data collection is involved when a researcher counts and records the umber of students wearing backpacks on campus in a given day?

-Manager at electronics store wants to know if customers who purchased video recorder over the last 12 months are satisfied with their products. If there are 4 different brands of video recorders made by the company, which sampling strategy would be best to use? -Which of the following types of samples are almost always biased?

-_____ is an expected error based only on the observations limited to a sample taken from a population.

**Section 3- Probability**

** probability to events**

- Random experiment- is an action or process that leads to one of several possible outcomes

**Requirements of Probabilities**

- Step 1- produce a list of outcomes. List must be exhaustive, meaning all possible outcomes must be included. Outcomes must be mutually exclusive meaning that no two outcomes can occur at the same time
- Sample space- list of exhaustive and mutually exclusive outcomes (denoted by S)
- S= {O1, O2…..Ok}
- Once sample space is prepared we begin the task of assigning probabilities to the outcomes. There are 3 approaches to assign probability to outcomes, each must follow the two rules governing probabilities
- 1- the probability of any outcome must lie between 0 and 1
- 2- The sum of the probabilities of all outcomes in a sample space must be 1

**Three approaches to Assigning Probabilities**

**Classical approach**– used by mathematicians to help determine the probability associated with games of chance.- If an experiment has n possible outcomes, this method would assign a probability of 1/n to each outcome.
- Ex- toss of coin, sum of probability must be 1, so probability for heads and tails are both ½ or 50%. For dice it is 1/6

**Relative Frequency Approach**– defines probability as the long run relative frequency with which an outcome occurs usually as a percentage- Ex. If 200 out of 1000 kids received an A in the class, the relative frequency is 200/1000 or 20%.
- This figure is a relative estimate of the probability of obtaining an A

**Subjective approach**– we define probability as the degree of belief that we hold in the occurrence of an event. Can be described as hunches or educated guesses- Use when it is not reasonable to use the classical approach and there is no history of outcomes for the relative freq. approach.

**Interpreting Probability**

- No matter which method is used to assign probability, we interpret it using relative frequency approach for an infinite number of experiments.
- Relative frequency approach is useful to interpret probability statements such as those heard from weather forecasters or scientists
- This is also the way we link the population and the sample to the statistical inference

**Joint Probability**

- How to calculate the probability of more complicated events from the probability of related events.
- Intersection of two events is one of the most important ways to look at combinations and relationships between events, ex. A intersects B or A Ç B
- The probability of the intersection is called the Joint probability.
- A È B is A union B
- Joint probabilities allow us to compute various probabilities

**Marginal Probability**

**Marginal Probability**is a measure of the likelihood that a particular event will occur regardless of were another event occurs.- Computed by adding across rows or down columns are so named because they are calculated in the margins of the table
- Ex. With MBA program grads running successful mutual funds, add top MBA grads and get .40 or 40% of all mutual fund managers graduated from top MBA program. Combination of all must still add to 1, non top mba is .60 or 60%

- Computed by adding across rows or down columns are so named because they are calculated in the margins of the table

**Conditional Probability**

- Conditional Probability is used to determine how two events are related, that is we can determine the probability of on event given the occurrence of another related event. The probability of an event
*given*that another event has occurred.- Called a conditional probability because we want to know the probability given a certain condition
- Ex. Probability that a fund manager by a top MBA grad will outperform the market, given the manager graduated from a top school

- Conditional probabilities are written as P(A|B) read as the probability of A given B
- Calculation on conditional probabilities raises the question of whether the two events are related

**Independence**

- One of the objectives in calculating a conditional probability is to determine if the two events are related. In particular we would like to know if thy are independent events.
- Two events are said to be independent if: P(A|B)=P(A) or P(B|A)=P(B)
**Independent**– two events are independent if the probability of one event is not affected by the occurrence of another event.- Ignore mutually exclusive combinations
- In each combination in the example the two events are independent, in this type of problem when one combination is dependent all 4 will be dependent or visa versa. This rule does not play to any other situation.

**Union**

**Union**is another combination of events, the Union of events A and B is the event that occurs when either A or B or both occur denoted as A È B- Ex. To determine that a randomly selected fund outperforms the market or the manager graduated from a top MBA program, we will need to compute the union of the two events. Union occurs when:
- Fund out performs the market and the manager graduated from a top mba program
- Fund outperforms the market and the manager did not graduate from a top mba program
- Fund does not out perform the market and the manager graduated from a top mba program

**Complement Rule**

- Complement of event A is the event that occurs when event A does not occur. Complement of event A is denoted as Ac. Event consisting of all sample points that are “not in A”
- The compliment of the rule defined here derives from the fact that the probability of an event and the probability of the events complement must sum to 1

- Compliment rule is P(Ac)=1-P(A) for any event A
- Ex. Roll of die, probability the number “1” is rolled is 1/6, the probability that some other number than “1” will be rolled is 1-1/6=5/6

**Multiplication Rule**

- Multiplication rule is used to calculate the join probability of two events. It is based on the formula for conditional probability defined earlier.
- P(A|B)=P(A Ç B)/P(B)
- We derive the multiplication symbol my multiplying both sides by P(B)
- Joint probability of ay two events is P(A Ç B)= P(A)xP(B|A)
- Ex. Course has 7 male and 3 female students, professor wants to select 2 students at random.
- Probability that the 1st student is female- P(A)= 3/10 = .30
- Probability after that event that the second student is female 2/9=.22
- To determine P(A and B)
- =(3/10)(2/9) which is =6/90, then = .067 i.e. there is 6.7% chance the professor will choose two female students from the graduate class

**Multiplication rule for independent events**

- If A and B are independent events, P(A|B)=P(A) and P(B|A)=P(B), it follows joint probability of two independent events is simply the product of the probability two events
- Multiplication rule for independent events- P(A Ç B)=P(A)xP(B)
- Ex. Probability of choosing females to answer questions in classes (if different teachers) is (3/10)=9/10=.09

**Addition Rule**

- Example two newspapers, Sun and Post 22% subscribe to Sun and 3% to post, 6% to both.
- P(A Ç B)= P(A)+P(B)- P(A Ç B)
- =.22+.35-.06
- =.51 or 51% probability that the randomly selected household subscribes to one or both newspapers

**Probability Trees**

- Effective and simpler way of applying the probability rules is with probability trees, wherein the events in an experiment are represented by lines. Resulting figure resembles a tree
- We calculate the joint probabilities by multiplying the probabilities on the linked branches
- Probability of selecting two female students for the class is P(F and F)= (3/10) (2/9)=6/90
- At the “ends” of the branches we calculate joint probabilities as the product of the individual probabilities on the preceding branches
- Probability tree with replacement- student can be chosen but then chosen again
- Advantage of probability trees- restrains users from making the wrong calculation. Once tree is drawn probabilities of branches inserted, virtually the only allowable calculation is the multiplication of the probabilities of linked branches
- Check on calculations, joint probabilities at the ends, the branches sum must equal 1, bc all possible events are listed
- This special form of the addition rule for mutually exclusive events can be applied to the join probabilities.
- No requirement for the branch splits to be binary, nor that the tree only goes two levels deep, or that there be the same number of splits at each sub node

**Compliment Rule to determine Probability**

- Example to determine: first time bar test takers have 72% pass rate, if thy fail they can re-take it. Those who fail the first time have an 88% chance they pass on second attempt.
- Find the probability that a randomly selected law grad passes.
- P(pass[on first exam])+P(fail[on first exam] and pass [on second exam])
- =.72+.2464=.9664 or 96.64% become lawyers by passing first or second exam

**Bayes’ Law**

- Conditional probability is often used to gauge the relationship between two events.
- In many examples conditional probability measures the probability that an event occurs given that a possible cause of the event has occurred.
- Baye’s law is the technique we use to compute the probability of one of the possible causes of a particular event
- Ex. Mba applicant is considering gmat prep course
- P(A|B)= P(A Ç B)/P(B) or .052/.259=.201 or that chances are 20.1% when prep course is taken
- Prior probabilities because they are determined prior to the decision about taking the preparatory course – P(A) and P(Ac)
- Posterior probability (or revised probability) because the prior probability is revised after the decision about taking the prep course – P9A|B)
- Bayes’ law can also be expressed in a formula for an algebraic approach

**Identifying the correct method**

- Key issue in determining which probability method to use is whether joint probabilities are provided or are required
- If joint probabilities are given:
- We can compute marginal probabilities by adding across rows or columns
- We can use joint and marginal probabilities to compute conditional probabilities for which a formula is available. This allows us to determine whether the events described by the table are independent or dependent.
- Can also use the addition rule to compute the probability that either of the two events occurs

- If joint probabilities are required (not given):
- Need to apply soe or all 3 of the probability rules where one or more joint probabilities are required
- Multiplication rule (either by formula or probability tree) to calculate probability of intersections
- Addition rule for mutually exclusive events when we want to add the joint probabilities
- Compliment rule to determine is an event that occurs when another event does not occur
- Bayes’ law to calculate new conditional probabilities

- First step in assigning a probability is to create an exhaustive and mutually exclusive list of outcomes.
- Second step is to use classical, relative frequency, or subjective approach and assign probability to outcomes. There are very few methods available to compute the probability of other events. These methods include probability rules and trees. An important application of these rules is Bayes’ law which allows us to compute conditional probabilities fro other forms of probability

**QUIZ Section 3**

Bayes’ Law is used to compute ____.

The classical approach describes a probability_________.

If a set of events includes all possible outcomes of an experiment these events are considered to be________.

Which statement is not correct? **i**

**Section 4- Sampling Distributions**

**Sampling Distribution of the Mean**

- Sampling distributions describe the distribution of sample statistics.
- A Sampling distribution is created by, sampling. Two ways to create:
- 1) Actually draw samples of the same size from a population, calculate the statistic of interest and then use descriptive techniques to learn more about the sampling distribution.
- 2) Relies on rules of probability and the laws of expected value and variance to derive the sampling distribution.

- Ex looking at 2 dice. Sampling distribution is created by looking at all samples of size n=2 (two dice) and their means
- Sampling distribution of the mean has a different mean from the original population
- Standard deviation of the sampling distribution mean is referred to as the standard deviation
- If the original population is not normally distributed, the sampling distribution of the mean will be normal

**Standard Error**

**Sampling error**– standard deviation of the sampling distribution- To compute take the standard deviation divided by the square root of the sample size

**Central Limit Theorem**

- Variance of the sampling distribution of X is less than the variance of the population were sampling from for all sample sizes
- Thus a randomly selected value of X (mean of the umber of spots observed in say 5 throws of dice), is likely to be closer to the mean value of 3.5 than is a randomly selected value X (number of spots observed in one throw)
- AS the number of throws increases, probability of the sample mean will also increase
- Thus we observe the sampling distribution of X becomes narrower or more concentrated about the mean, as sample size n increases
- As n gets larger the sampling distribution of X becomes increasingly bell shaped.

- Sampling distribution of the mean of random sample drawn from any population is approximately normal for a sufficiently large sample size.
- The larger the sample size the more closely the sampling distribution of X will resemble a normal distribution.

- Accuracy of the approximation alluded to in the central limit theorem depends on the probability distribution of the population and on the sample size.

**Sampling Distribution of the Sample Mean**

- Statisticians have shown that the mean of the sampling distribution is always equal to the mean of the population and that the standard error is equal to s/Ön for infinitely large populations. If the population is finite, the standard error is
- Where N is the population size and ÖN-n/N-1 is called the finite population correction factor. An analysis revealed that if the population size is large relative to the sample size, the finite population correction factor is close to 1 and can be ignored
- As a rule of thumb, we treat any population that is at least 20x larger than the sample size as large.
- In practice most applications involve populations that qualify as large because if the population is small it may be possible to investigate each member of the population and in doing so calculate the parameters precisely
- As a consequence the finite population correlation factor is usually omitted

- If x is normal,
**X**(with line) is normal. If X is non-normal,**X**(with line) is approximately normal for sufficiently large sample sizes. The definition of sufficiently large depends on the extent of non-normality of X.

**Creating the Sampling Distribution Empirically**

- To create the sampling distribution empirically, we can actually toss the dice repeatedly, calculating the mean for each sample, counting the number of times each value of
**X**occurs and computing the relative frequencies to estimate the theoretical probabilities. - Disadvantages are excessive amount of time

**Contents of a 32-oz bottle**

· Ex. Foreman at a bottling plant observed that the amount of soda in a 32oz bottle is actually normatively distributed random variable, with a mean of 32.2oz and a standard deviation of .3oz

o We want to find P(X>32) where X is normally distributed and m=32.2 and s=.3

o P(Z>.67)=1-.2514=.748

o There is about a 75% chance that a bottle of soda contains more than 32 oz

**Salaries of business school graduates**

· We want to fin the probability that the sample mean is less than $750 (earned per week for grad school grads)- P(**X**<750)

· The distribution of **X** , the weekly income, is likely to be positively skeed but not sufficiently so to make the distribution of **X** non normal. As a result we may assume that **X** is normal with the mean mx=m800 and standard deviation is sx=20

· Thus =P(Z<-2.5) or =.5-.4938 which is =.0062

· The probability of observing a sample as low as $750 when the population mean is $800 is extremely small. Because the event is quite unlikely

**Using the Sampling Distribution for Inference**

- P(-1.96<Z<1.96)=.95
- The middle 95% of a normal distribution leaves tails of both the left and right of the distribution. The z scores associated with those tails of .025 are +- 1.96

**Sampling Distribution of a proportion**

- Proportion of the successes if we are only looking for a yes or no answer. Success is getting the outcome we are interested in even if its broken items.
- Binominal experiments because they only have two outcomes (success or failure), and have binomial distribution
- The binomial distribution is a Discrete distribution because it can only take on whole number values
- The binomial distribution parameter is p, the probability of success in any trial

- To compute binomial probabilities we have to assume that p was known. However in the real world, p is unknown, requiring a statistics practitioner to estimate its value from a sample.
- Sample proportion is the estimator of a population proportion, that is we count the number of successes in a sample and compute.
- P (hat) is where X is the number of successes and n is the sample size. When we can take a sample of size n, were actually conducting a binominal experiment and as such a result, X is binomially distributed. Thus the probability of P(hat) can be calculated from its value of X
- Suppose we have a binominal experiment with n=10 and p=.4, To find the probability that the sample proportion P(hat) is less than or equal to .50, we find the probability that X is less than or equal to 5 because 5/10=.50
- P(Phat≤.50=P(X≤5)=.8383
- We can calculate the probability associated with other values of P(hat) similarly using s binomial distribution calculator or table or computer
- Discrete distributions such as the binomial do not lend themselves easily o the kinds of calculation needed for inference. Inference is the reason we need sampling distributions. Fortunately we can approximate the binomial distribution by a normal distribution

**Normal Approximation to the Binomial Distribution**

- The normal distribution can be used to approximate a binomial distribution. We developed the destiny function by converting a histogram so that the total area in a rectangle equaled to 1. We can do the same for the binomial distributor.
- Ex. X is binomial random variable with n=20 and p=.5. We can easily determine the probability of each value of X where X=0,1,2,3….19,20. Rectangle representing the value of X is drawn so that its area equals the probability. We accomplish this by allowing the height of the rectangle equal the probability and the base of the rectangle equal 1.
- If we smooth the rectangles we get a bell shaped curve
- Thus to use a normal approximation all we need to do is find the area under the normal curve between 9.5 and 10.5. to find normal probabilities requires us to first standardize by subtracting the mean and dividing the standard deviation. The values for m=10 and s=2.24

- Normal approximation of the binomial works best when he number of experiments, n(sample size) is large, and the probability of success, p, is close to .5. For the approximation to provide good results two conditions should be met:
- 1) np≥ 5
- 2) n(1-p) ≥ 5
- Or both the number of expected successes and expected failures are ≥ 5

- To calculate P(X=10) using the normal distribution, we can find the area under the normal curve between 9.5 and 10.5
- P(X=10) ≈ P(9.5<Y<10.5) Where Y is the normal random variable approximating the binomial random variable X.
- P(X=10)=.176 while P(9.5<Y<10.5) = .1742 so the approximation is quite good

- Using the laws of expected value and variance, we can determine the mean, variance and standard deviation of P(hat). The standard deviation of P(hat) is called the
**standard error of the proportion.** - P(hat) is approximately normally distributed provided that np and n(1-P) are greater than or equal to 5.

**Political Survey Example**

The price is based on these factors:

Academic level

Number of pages

Urgency

Basic features

- Free title page and bibliography
- Unlimited revisions
- Plagiarism-free guarantee
- Money-back guarantee
- 24/7 support

On-demand options

- Writer’s samples
- Part-by-part delivery
- Overnight delivery
- Copies of used sources
- Expert Proofreading

Paper format

- 275 words per page
- 12 pt Arial/Times New Roman
- Double line spacing
- Any citation style (APA, MLA, Chicago/Turabian, Harvard)

Delivering a high-quality product at a reasonable price is not enough anymore.

That’s why we have developed 5 beneficial guarantees that will make your experience with our service enjoyable, easy, and safe.

You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.

Read moreEach paper is composed from scratch, according to your instructions. It is then checked by our plagiarism-detection software. There is no gap where plagiarism could squeeze in.

Read moreThanks to our free revisions, there is no way for you to be unsatisfied. We will work on your paper until you are completely happy with the result.

Read moreYour email is safe, as we store it according to international data protection rules. Your bank details are secure, as we use only reliable payment systems.

Read moreBy sending us your money, you buy the service we provide. Check out our terms and conditions if you prefer business talks to be laid out in official language.

Read more